Well-designed Emergency Conversion Kit - LED Emergency Driver Lasting 3 Hours – SASELUX

- This emergency kit provides

60-180 Minutes duration in the event of a power failure. Suit for LED luminaire with external driver 100W or below.

- Lithium iron phosphate Battery backup

IFR18650MUB 3.2V 1500mAh battery cell,

- Output: DC10-50V. 50-200V Constant power 2-6W

Dimension

-Automatic self-test function

-Status of the battery.

-Status of the LED

-Charge condition

-Duration test

-Functional test

Application

-LED Downlight, Tri-proof, Linear LED light fixture

Battery pack

There are three combinations of batteries. Please ask the service commissioner for the specifications.

Automatic self-test function

LED status display

Color	State
	Red stable: charging mode
	Red flashing:Failure ad belowBattery is not connected Battery is defectiveLoad failure during emergency mode, open circuit/short circuitBattery capacity abnormal
	Green stable: battery fully charged
	Red and Green off: discharging mode or mains supply disconnected

Functional test

Connecting battery firstly, connecting mains supply then, this emergency conversion module will automatically go into emergency mode and discharge for 3 seconds.

Timer stats to calculate when battery is fully charged for the very first time.

The emergency conversion module will automatically discharge 10 seconds every 30 days as a short time functional test.

Duration test

Emergency conversion module will automatically discharge 90 minutes every 180 days.

If a mains supply failure occurs at any time, before or during functional test and duration test period, emergency conversion module will go into emergency mode immediately. Timer would not re-calculate if battery is not disconnected after emergency mode. If the battery is disconnected, timer will re-calculate.

The test switch and indicator light are connected through a plug on the inverter.